In this Section
Related Pages
Peugeot Bipper
The Peugeot Bipper is designed for professionals looking for a vehicle which is easy to drive and can be parked easily. Thanks to the asymmetric hinged rear doors and sliding side doors, the Peugeot Bipper is also very easy to load and unload, even in the narrowest of spaces.
It is available with a choice of two engines. A 1.4 litre petrol engine developing power of 75 bhp or a 1.4 litre HDi diesel engine developing 68 bhp and emitting only 119 g of CO2 per km. The HDi diesel engine is also available with an optional electronically controlled manual gearbox, the first time this type of gearbox has been available on a Peugeot light commercial vehicle and this offers greater convenience to drivers using the vehicle in busy urban areas.
For professionals who spend many hours in their van, this gearbox will be a huge benefit to them in terms of reduced driving fatigue and reduced fuel consumption and emissions.
Inside, the cube-like load area has been designed to offer a generous usable space. The effective floor load length is 1.52 m, with a maximum interior height of 1.18 m. The width between the wheel arches is 1.05 m, giving a total usable volume of 2.5 m3 .
Thanks to an innovative folding multifunction passenger seat, it is possible to increase the load capacity even further by using the space normally occupied by the seat. This allows long objects to be carried as far forward as the fascia panel; the maximum effective floor load length is then increased by nearly a metre, to 2.49 m. The effective load volume in this configuration is now 2.80 m3 .
With all this available space, the Peugeot Bipper can transport a payload of up to 610 kg. Access to the carried load is made easy by means of two asymmetric hinged rear doors (60/40) which ensure all-round access to the rear load space, both heightwise and widthwise. The two doors can open to an angle of 90° or even 180° if required, thanks to an innovative check strap design. If The load sill height, thanks to the optimised design of the rear doors and rear bumper, is just 527 mm.
An important factor when choosing a commercial vehicle is the running costs. The Peugeot Bipper has been designed to keep these costs to a minimum.